Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

The feasibility of a novel 3D-Printed patient specific cutting guide for extended trochanteric osteotomies

Reza Bergemann, Gregory R. Roytman, Lidia Ani, Alim F. Ramji, Michael P. Leslie, Steven M. Tommasini and Daniel H. Wiznia
3D Printing in Medicine 10 (1) (2024)
https://doi.org/10.1186/s41205-024-00204-3

Flexion contracture can cause component mismatch in the Prophecy® preoperative patient-specific instrumentation for Evolution® medial-pivot knee system

Shuhei Hiyama, Tsuneari Takahashi, Mikiko Handa and Katsushi Takeshita
SICOT-J 10 12 (2024)
https://doi.org/10.1051/sicotj/2024009

Patient-specific instrumentation in total knee arthroplasty: a review of the current literature

Wolfgang SCHÖNTHALER, Jan DAUWE and Lukas A HOLZER
Acta Orthopaedica Belgica 89 (2) 299 (2023)
https://doi.org/10.52628/89.2.11543

A Review on the Full Chain Application of 3D Printing Technology in Precision Medicine

Shenglin Wu, Jinbin Zeng, Haoxin Li, Chongyang Han, Weibin Wu, Wenyi Zeng and Luxin Tang
Processes 11 (6) 1736 (2023)
https://doi.org/10.3390/pr11061736

Use of a preoperative 3D templating and proximal lateral tibial fitting patient-specific instrumentation in fixed valgus complex primary total knee arthroplasty for a patient with retaining hardware for internal fixation to treat Schatzker type V tibial plateau fracture: A case report

Yuta Mizunuma, Tsuneari Takahashi, Masaki Iguchi, Hideyuki Sasanuma, Akihiro Saitsu, Mikiko Handa, Tomohiro Matsumura and Katsushi Takeshita
SAGE Open Medical Case Reports 11 (2023)
https://doi.org/10.1177/2050313X231215217

Negligible effect of surgeon experience on the accuracy and time to perform unrestricted caliper verified kinematically aligned TKA with manual instruments

Stephen M. Howell, Alexander J. Nedopil and Maury L. Hull
Knee Surgery, Sports Traumatology, Arthroscopy 30 (9) 2966 (2022)
https://doi.org/10.1007/s00167-022-06939-y

Total knee arthroplasty, following application of Taylor Spatial Frames to treat knee osteoarthritis with severe tibia extraarticular deformity due to fracture malunion: A case report

Tsuneari Takahashi, Tomohiro Matsumura and Katsushi Takeshita
Trauma Case Reports 39 100640 (2022)
https://doi.org/10.1016/j.tcr.2022.100640

A Coronal Landmark for Tibial Component Positioning With Anatomical Alignment in Total Knee Arthroplasty: A Radiological and Clinical Study

Tianlun Gong, Ruoyu Wang, Song Gong, et al.
Frontiers in Surgery 9 (2022)
https://doi.org/10.3389/fsurg.2022.847987

3D templating and patient-specific instrumentation in primary total knee arthroplasty with retained internal fixation hardware: Two case reports

Tsuneari Takahashi, Tatsuya Kubo, Yuya Kimura, Naoki Yamaguchi and Katsushi Takeshita
Trauma Case Reports 42 100716 (2022)
https://doi.org/10.1016/j.tcr.2022.100716

In-hospital production of 3D-printed casts for non-displaced wrist and hand fractures

Shai Factor, Franck Atlan, Tamir Pritsch, et al.
SICOT-J 8 20 (2022)
https://doi.org/10.1051/sicotj/2022021

In-House, Fast FDM Prototyping of a Custom Cutting Guide for a Lower-Risk Pediatric Femoral Osteotomy

Leonardo Frizziero, Gian Maria Santi, Christian Leon-Cardenas, Giampiero Donnici, Alfredo Liverani, Paola Papaleo, Francesca Napolitano, Curzio Pagliari, Giovanni Luigi Di Gennaro, Stefano Stallone, Stefano Stilli, Giovanni Trisolino and Paola Zarantonello
Bioengineering 8 (6) 71 (2021)
https://doi.org/10.3390/bioengineering8060071

Three-Dimensional Printing of Medical Devices Used Directly to Treat Patients: A Systematic Review

Tjaša Kermavnar, Alice Shannon, Kevin J. O'Sullivan, et al.
3D Printing and Additive Manufacturing 8 (6) 366 (2021)
https://doi.org/10.1089/3dp.2020.0324

Evaluation of the accuracy of resected bone thickness based on patient-specific instrumentation during total knee arthroplasty

Kazumasa Yamamura, Fumiaki Inori and Sadahiko Konishi
Archives of Orthopaedic and Trauma Surgery 141 (9) 1583 (2021)
https://doi.org/10.1007/s00402-021-03805-3

The Bony Resection Accuracy with Patient-Specific Instruments during Total Knee Arthroplasty: A Retrospective Case Series Study

Liang Yuan, Bin Yang, Xiaohua Wang, et al.
BioMed Research International 2021 1 (2021)
https://doi.org/10.1155/2021/8674847

Deep 3D Convolutional Networks to Segment Bones Affected by Severe Osteoarthritis in CT Scans for PSI-Based Knee Surgical Planning

Davide Marzorati, Mattia Sarti, Luca Mainardi, Alfonso Manzotti and Pietro Cerveri
IEEE Access 8 196394 (2020)
https://doi.org/10.1109/ACCESS.2020.3034418

Angular limit for coronal joint deformity correction using intramedullary guidance in total knee arthroplasty. A pilot study

Chahine Assi, Jad Mansour, Camille Samaha, Pascal Kouyoumdjian and Kaissar Yammine
SICOT-J 6 22 (2020)
https://doi.org/10.1051/sicotj/2020019