EDP Sciences logo
Submit your paper
Search
Menu
All issues Volume 4 (2018) SICOT-J, 4 (2018) 56 Full HTML
Open Access
Issue
SICOT-J
Volume 4, 2018
Article Number 56
Number of page(s) 4
Section Spine
DOI https://doi.org/10.1051/sicotj/2018052
Published online 05 December 2018

© The Authors, published by EDP Sciences, 2018

Licence Creative CommonsThis is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Introduction

Cervical spine accounts for 26.8% of all spinal osteoid osteomas. Surgical excision is recommended for patients unresponsive to anti-inflammatory drugs [1,2] . Intraoperative localization of the nidus, which can be extremely challenging, governs clinical results [3,4]. Surgical techniques of the spine have evolved, and minimally invasive procedures are now utilized to decompress the spinal cord with high precision. Posterior micro-foraminotomy, lamino-foraminotomy, cervical anterior/posterior endoscopic approaches and minimally invasive laminectomy are examples of such procedures [5]. A careful patient selection is essential in these cases. The authors report the first description of a technique of excision of an osteoid osteoma of the C6 body proximal to the spinal cord as well as the superior end plate using intraoperative navigation. Precise localization and excision of the juxta-intervertebral disc lesion helped in avoiding fusion and maintained motion of the C5–C6 segment. Clavicle served as the anchor for minimal invasively placed patient reference array (PRA). A novel application of the already described anterior trans-corporeal tunnel approach in treatment of cervical spondylotic myelopathy and herniated discs was utilized in the described case preserving segmental motion and function [6,7].

Technical note/case report

A 20-year-old male with a 2-year history of neck pain of progressively increasing severity had been resilient to NSAIDs. CT scan showed an oval osteolytic lesion with ossified nidus and surrounding sclerosis suggestive of an osteoid osteoma at the right posterosuperior corner of C6 vertebral body abutting the superior end plate and close to the spinal cord. The lesion measured 6.3 × 5.6 × 6 20 mm in dimensions (Figure 1). A plan of intraoperative 3D C-arm-based navigation was finalized (Stealth-Station S7, Medtronic; SIEMENS Arcadis Orbic 3D C-arm) for precise location and excision of the lesion with preservation of adjacent disc and cervical mobility (Figure 2). A prerequisite of successful 3D spin data set integration to the navigation workstation demands affixing the patient reference array (PRA) to an accessible fixed bony point closest to the region-of-interest which maximizes the accuracy of a navigable instrument while maintaining a free operational corridor. A decision to use middle-third of clavicle was taken. The head and shoulders were taped down to the operating table to prevent rotational movements of neck and indirect movement of clavicle along with shoulder. A right-sided approach was taken through a 2-cm horizontal skin-crease incision after external level marking using the navigated probe. Surface localization of the hidden osteoid osteoma was made and careful drilling initiated with the help of real-time navigation using the navigated probe. The probe guided in preserving the adjacent end plate and the disc to reach the ventral surface of the lesion. The cavity was curetted followed by drilling of walls for completion of intralesional extirpation (Figure 3). The patient was completely relieved of the pain. A postoperative CT scan done showed adequate excision with preservation of adjacent end plate and the intervertebral disc (Figure 4). Histopathology showed osteoid osteoma (Figure 5). Follow-up scans at 1 year show no local recurrence, a healthy C5–C6 intervertebral disc and CT scan depicting formation of bone at the site of excision (Figure 6). Follow-up flexion and extension X-rays at 1 year show stability and preservation of the motion segment (Figure 7).

thumbnail Figure 1

(a) Preoperative CT scan with the nidus in C6 vertebral body abutting the end plate and posterior wall. (b) Plain X-rays not depicting the lesion. (c) MRI T1 sagittal and axial images showing the lesion with peripheral edema.
thumbnail Figure 2

Intraoperative pictures. (a) Patient reference array attachment on left clavicle. (b) Drilling for threaded pin placement. (c) 3D CT image depicting the location of osteoid osteoma.
thumbnail Figure 3

(a) Use of navigation for surface location. (b) Precise drilling toward the lesion using guided probe. (c) Checking finally adequate intralesional excision.
thumbnail Figure 4

Postoperative CT scan demonstrating adequate excision with preservation of bony end plate.
thumbnail Figure 5

Photomicrographs at 400× magnification show osteoid trabeculae separated by fibrovascular tissue and lined by osteoblasts (stain: hematoxylin and eosin).
thumbnail Figure 6

One-year follow-up imaging depicting (a) MRI sagittal view with preservation of adjacent disc; (b) CT scan coronal; (c) sagittal; and (d) axial views with filling of cavity with new bone formation and preservation of disc height and stability.
thumbnail Figure 7

One-year follow-up flexion and extension X-rays show stability and preservation of the motion segment.

Discussion

Localization of the nidus is a challenge in osteoid osteoma. Intraoperative gamma probe is one such technique used in localization [8]. However, wide surgical excision and additional fusion may still be necessary since the lesion is usually not grossly visible [9–11]. CT-guided percutaneous localization and resection of nidus using a drill has been described for osteoid osteomas of the extremities and spine [12]. However, the results of this technique are questionable in the spine [8,3]. Again, percutaneous procedures were ruled out in this case in view of the related vital structures. Percutaneous radio-frequency thermal ablation and laser photocoagulation have been promoted as minimally invasive treatment options for spinal osteoid osteomas. However, thermal necrosis denying histologic verification of the specimens[13,14], risk of neurovascular injury [15], incomplete resection and recurrent symptoms necessitating reoperation are some of the problems with radio frequency ablation [16,17]. Intraoperative 3D navigation has been previously utilized for resection of osteoid osteomas and other bony lesions of extremities as well as spine [18–20]. The placement of PRA is crucial to the successful data integration and accuracy of real-time tracking of registered instruments. The stable foundation of PRA is commonly achieved by clamping on to the nearby spinous process or tri-flanged pin placement in iliac crest for lumbar spine procedures or a 3-point head-holder-based external array used in intracranial surgeries. To navigate in the anterior cervical spine, a detailed technique has not been described yet with the patient in supine position. Clavicle, being a subcutaneous bone with minimally mobile attachments at both ends and in close proximity to the anterior cervical spine, is ideally suitable for the purpose and hence can be routinely used [4]. The cortical tubular nature of the middle third of clavicle is technically more suitable for a minimally invasive threaded pin (Caspar distractor pin) placement and the resultant small scar gets concealed well under clothing. In this particular case, precise localization and excision of the precariously placed nidus using navigation in all three axes benefited the patient. Anterior transcorporeal tunnel approach has variably been used by different authors for patients with focal compression causing cervical spondylotic myelopathy or a disc herniation but its utilization in excision of a nidus of osteoid osteoma has not been described in literature [4,6]. C5–C6 segment being significantly mobile, especially in a young patient was not fused, thus saving motion. Avoiding fusion helped in reducing the invasiveness, morbidity, pain, costs, and all the repercussions of motion sacrifice. Use of microscope and navigation assisted in making sure that the surgery was safe with no neurovascular injury.

Conclusion

The intraoperative 3D navigation system allowed a minimally invasive pin-point approach to localize and excise in real-time a precariously seated osteoid osteoma without causing any neurovascular injury and saving intervertebral motion with complete pain relief. Employment of minimally invasive techniques and possibility of fixation of PRA on middle 1/3rd clavicle and utilization of image-guided navigation for anterior cervical spine procedures have created a paradigm shift in surgical accuracy in anterior cervical approaches allowing motion preservation.

Conflict of interest

The authors declare that they have no conflicts of interest in relation to this article.

Acknowledgements

The surgery was performed at Saifee Hospital, Maharishi Karve Marg, Charni Road, Mumbai.

References

  1. Kneisl JS, Simon MA (1992) Medical management compared with operative treatment for osteoid-osteoma. J Bone Joint Surg Am 74, 179–185. [CrossRef] [PubMed] [Google Scholar]
  2. Gasbarrini A, Cappuccio M, Bandiera S, Amendola L, van Urk P, Boriani S (2011) Osteoid osteoma of the mobile spine: surgical outcomes in 81 patients. Spine 36, 2089–2093. [CrossRef] [PubMed] [Google Scholar]
  3. Ozaki T, Liljenqvist U, Hillmann A, Halm H, Lindner N, Gosheger G, Winkelmann W (2002) Osteoid osteoma and osteoblastoma of the spine: experiences with 22 patients. Clin Orthop Relat Res 1, 394–402. [Google Scholar]
  4. Quillo-Olvera J, Lin GX, Suen TK, Jo HJ, Kim JS (2018) Anterior transcorporeal tunnel approach for cervical myelopathy guided by CT-based intraoperative spinal navigation. J Clin Neurosci 48, 218–223. [CrossRef] [PubMed] [Google Scholar]
  5. Lee SH, Lee JH, Choi WC, Jung B, Mehta R (2007) Anterior minimally invasive approaches for the cervical spine. Orthop Clin N Am 38, 327–337. [CrossRef] [Google Scholar]
  6. Kim JS, Eun SS, Prada N, Choi G, Lee SH (2011) Modified transcorporeal anterior cervical microforaminotomy assisted by O-arm-based navigation: a technical case report. Eur Spine J 20, 147–52. [Google Scholar]
  7. Kim TT, Johnson JP, Pashman R, Drazin D (2016) Minimally invasive spinal surgery with intraoperative image-guided navigation. Biomed Res Int 2016, 5716235. [Google Scholar]
  8. Van Royen BJ, Baayen JC, Pijpers R, Noske DP, Schakenraad D, Wuisman PI (2005) Osteoid osteoma of the spine: a novel technique using combined computer-assisted and gamma probe-guided high-speed intralesional drill excision. Spine 30, 369–373. [CrossRef] [PubMed] [Google Scholar]
  9. Faraj A, Byrne P, Mehdian SM (1998) Osteoid osteoma of the lateral mass of C5. Should excision be combined with fusion? Eur Spine J 7, 242–245. [CrossRef] [PubMed] [Google Scholar]
  10. Mori K, Neo M, Takemoto M, Nishizawa K, Imai S (2016) Navigated pin-point approach to osteoid osteoma adjacent to the facet joint of spine. Asian Spine J 10, 158–163. [CrossRef] [PubMed] [Google Scholar]
  11. Osebold WR, Lester EL, Hurley JH, Vincent RL (1993) Intraoperative use of the mobile gamma camera in localizing and excising osteoid osteomas of the spine. Spine 18, 1816–1828. [CrossRef] [PubMed] [Google Scholar]
  12. Nagashima H, Nishi T, Yamane K, Tanida A (2010) Case report: osteoid osteoma of the C2 pedicle: surgical technique using a navigation system. Clin Orthop Relat Res 468, 283. [CrossRef] [PubMed] [Google Scholar]
  13. Labbe JL, Clement JL, Duparc B, Poey C, Railhac JJ (1995) Percutaneous extraction of vertebral osteoid osteoma under computed tomography guidance. Eur Spine J 4, 368–371. [CrossRef] [PubMed] [Google Scholar]
  14. Vanderschueren GM, Taminiau AH, Obermann WR, Bloem JL (2002) Osteoid osteoma: clinical results with thermocoagulation. Radiology 224, 82–86. [CrossRef] [PubMed] [Google Scholar]
  15. Kulkarni AG, Dhruv AN, Bassi AJ (2013) Microendoscopic excision of C2 osteoid osteoma: a technical report. Spine 38, E1231–E1234. [CrossRef] [PubMed] [Google Scholar]
  16. Assoun J, Railhac JJ, Bonnevialle P, Poey C, Salles de Gauzy J, Baunin C, Cahuzac JP, Clement JL, Coustets B, Railhac N (1993) Osteoid osteoma: percutaneous resection with CT guidance. Radiology 188, 541–547. [CrossRef] [PubMed] [Google Scholar]
  17. Sans N, Galy-Fourcade D, Assoun J, Jarlaud T, Chiavassa H, Bonnevialle P, Railhac N, Giron J, Morera-Maupomé H, Railhac JJ (1999) Osteoid osteoma: CT-guided percutaneous resection and follow-up in 38 patients. Radiology 212, 687–692. [CrossRef] [PubMed] [Google Scholar]
  18. Rajasekaran S, Kamath V, Shetty AP (2008) Intraoperative Iso-C three-dimensional navigation in excision of spinal osteoid osteomas. Spine 33, E25– E29. [CrossRef] [PubMed] [Google Scholar]
  19. Campos WK, Gasbarrini A, Boriani S (2013) Case report: curetting osteoid osteoma of the spine using combined video-assisted thoracoscopic surgery and navigation. Clin Orthop Relat Res 471, 680–685. [CrossRef] [PubMed] [Google Scholar]
  20. Yu F, Niu XH, Zhang Q, Zhao HT, Xu LH, Deng ZP (2015) Radiofrequency ablation under 3D intraoperative Iso-C C-arm navigation for the treatment of osteoid osteomas. Br J Radiol 88, 20140535. [CrossRef] [PubMed] [Google Scholar]

Cite this article as: Kulkarni A, Patel A (2018) Motion preservation surgery: excision of juxta C5–C6 intervertebral disc osteoid osteoma using 3D C-arm based navigation: technical report. SICOT-J, 4, 56.

All Figures

thumbnail Figure 1

(a) Preoperative CT scan with the nidus in C6 vertebral body abutting the end plate and posterior wall. (b) Plain X-rays not depicting the lesion. (c) MRI T1 sagittal and axial images showing the lesion with peripheral edema.
In the text
thumbnail Figure 2

Intraoperative pictures. (a) Patient reference array attachment on left clavicle. (b) Drilling for threaded pin placement. (c) 3D CT image depicting the location of osteoid osteoma.
In the text
thumbnail Figure 3

(a) Use of navigation for surface location. (b) Precise drilling toward the lesion using guided probe. (c) Checking finally adequate intralesional excision.
In the text
thumbnail Figure 4

Postoperative CT scan demonstrating adequate excision with preservation of bony end plate.
In the text
thumbnail Figure 5

Photomicrographs at 400× magnification show osteoid trabeculae separated by fibrovascular tissue and lined by osteoblasts (stain: hematoxylin and eosin).
In the text
thumbnail Figure 6

One-year follow-up imaging depicting (a) MRI sagittal view with preservation of adjacent disc; (b) CT scan coronal; (c) sagittal; and (d) axial views with filling of cavity with new bone formation and preservation of disc height and stability.
In the text
thumbnail Figure 7

One-year follow-up flexion and extension X-rays show stability and preservation of the motion segment.
In the text

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.