Putting 3D modelling and 3D printing into practice: virtual surgery and preoperative planning to reconstruct complex post-traumatic skeletal deformities and defects
SICOT-J, 3 (2017) 16
Published online: 2017-02-21
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Matched comparative study of 3D printed microporous tantalum prosthesis versus autologous bone graft in the final stage of Masquelet induced membrane surgery
Yin Yang, Yongqing Xu, Jian Shi, Wei Yu, Xiaoqing He, Qixiong Guo and Xinyu FanInjury 57 (4) 113087 (2026)
https://doi.org/10.1016/j.injury.2026.113087
Enhanced construct stability with a locking plate system integrated into 3D-printed titanium implants for bone defect reconstruction: a biomechanical comparison of locking versus nonlocking screw fixation
Kyu-Won Kang, Sook Yang, Sun Young Kim and Byung-Jae KangJournal of Orthopaedic Surgery and Research 21 (1) (2026)
https://doi.org/10.1186/s13018-025-06598-y
UltraBoneUDF: Self-supervised bone surface reconstruction from ultrasound based on neural unsigned distance functions
Luohong Wu, Matthias Seibold, Nicola A. Cavalcanti, Giuseppe Loggia, Lisa Reissner, Bastian Sigrist, Jonas Hein, Lilian Calvet, Arnd Viehöfer and Philipp FürnstahlComputerized Medical Imaging and Graphics 127 102690 (2026)
https://doi.org/10.1016/j.compmedimag.2025.102690
Open Tibial Fractures Part 2: A Narrative Review of Definitive Treatment and Potential Applicability to the Southern African Context
Erik Hohmann, Maketo Molepo, Maritz Laubscher and Kevin TetsworthOrthopedic Research and Reviews Volume 18 1 (2026)
https://doi.org/10.2147/ORR.S553515
Patient-Specific Lattice Implants for Segmental Femoral and Tibial Reconstruction (Part 1): Defect Patterns, Fixation Strategies and Reconstruction Options—A Review
Mansoureh Rezapourian, Anooshe Sadat Mirhakimi, Mahan Nematollahi, Tatevik Minasyan and Irina HussainovaBiomimetics 11 (2) 128 (2026)
https://doi.org/10.3390/biomimetics11020128
Clinical translation of 3D-printed patient-specific bone implants: a consensus statement
Markus Laubach, Giles Michael Cheers, Tina Frankenbach-Désor, Lucas Philipp Weimer, Heiko Baumgartner, Wolfgang Böcker, Rainer Burgkart, Gianluca Cidonio, Matteo D’Este, Ulrich Dirnagl, Natascha Drude, Jörg Eschweiler, Michael Friebe, Bergita Ganse, Hanna Hartmann, Frank Hildebrand, Christoph Hoog Antink, MinJoo Kim, Ulrich Kneser, Witold Łojkowski, Gerd Marmitt, Susanne Mayer-Wagner, Maximilian Praster, Nils Reimers, Katja Schenke-Layland, et al.International Journal of Surgery 111 (11) 7497 (2025)
https://doi.org/10.1097/JS9.0000000000002944
Establishment of design guidelines for patient-specific 3D-printed reconstruction implants for large distal femoral defects
Po-Kuei Wu, Wei-Che Tsai, Hsuan-Wen Wang and Chun-Li LinMaterials & Design 251 113668 (2025)
https://doi.org/10.1016/j.matdes.2025.113668
Comparison of Two‐Dimensional and Three‐Dimensional Preoperative Planning Measurements for High Tibial Osteotomy
Haohao Bai, Yadi Sun, Jianxiong Ma, Ying Wang, Yan Wang, Bin Lu, Lei Sun, Hongzhen Jin, Xingwen Zhao and Xinlong MaOrthopaedic Surgery 17 (11) 3169 (2025)
https://doi.org/10.1111/os.70118
Advances in growth factor-containing 3D printed scaffolds in orthopedics
Longwen Zhan, Yigui Zhou, Ruitang Liu, Ruilong Sun, Yunfei Li, Yongzheng Tian and Bo FanBioMedical Engineering OnLine 24 (1) (2025)
https://doi.org/10.1186/s12938-025-01346-z
229 (2025)
https://doi.org/10.1007/978-3-032-04016-9_17
Applying 3D‐Printed Porous Ti6Al4V Prostheses to Repair Osteomyelitis‐Induced Partial Bone Defects of Lower Limbs: Finite Element Analysis and Clinical Outcomes
Bingchuan Liu, Qizhao Tan, Zhengguang Wang, Guojin Hou, Caimei Wang and Yun TianOrthopaedic Surgery 17 (1) 115 (2025)
https://doi.org/10.1111/os.14268
Effect of osteophyte removal on simulated range of motion using 3-dimensional preoperative planning software for reverse total shoulder arthroplasty
Joseph J. Ruzbarsky, Annalise M. Peebles, Lauren Watkins, Amelia R. Kruse, Brendan M. Lilley, Stephanie K. Eble, Patrick J. Denard, Anthony A. Romeo and Matthew T. ProvencherJSES International 8 (1) 104 (2024)
https://doi.org/10.1016/j.jseint.2023.08.011
(2024)
https://doi.org/10.21203/rs.3.rs-4507397/v1
3D-printed titanium porous prosthesis combined with the Masquelet technique for the management of large femoral bone defect caused by osteomyelitis
Zhuo Chen, Yong Xing, Xingcai Li, Bingchuan Liu, Ning Liu, Yaping Huo and Yun TianBMC Musculoskeletal Disorders 25 (1) (2024)
https://doi.org/10.1186/s12891-024-07576-x
Biomaterials‐Based Technologies in Skeletal Muscle Tissue Engineering
Wei Luo, Hanli Zhang, Renwen Wan, Yuxi Cai, Yinuo Liu, Yang Wu, Yimeng Yang, Jiani Chen, Deju Zhang, Zhiwen Luo and Xiliang ShangAdvanced Healthcare Materials 13 (18) (2024)
https://doi.org/10.1002/adhm.202304196
Development of Titanium Custom-Made Mandibular Reconstruction Plate Using Additive Manufacturing
Tatsuya KAKUTANI, Takaaki UENO, Hiroyuki NAKANO, Seiji YAMAGUCHI, Hisashi KITAGAKI, Shuntaro TERAUCHI and Tomiharu MATSUSHITAJournal of the Japan Society for Technology of Plasticity 65 (757) 22 (2024)
https://doi.org/10.9773/sosei.65.22
3D TECHNOLOGIES IN THE DEVELOPMENT OF BIOMATERIALS FOR ORTHOPEDICS: EFFICIENCY AND PRECISION IN MODERN SURGERY
Iulia Alecsandra SALCIANU, Simona PARVU and Ana Maria CHIRILOVMedicine and Materials 4 (3) 103 (2024)
https://doi.org/10.36868/MEDMATER.2024.04.03.103
The true pelvic volume change with various corrective osteotomy techniques for exstrophy-epispadias complex spectrum: the value of computer-assisted virtual surgery
Mohamed Kenawey, Emmanouil Morakis, Raimondo Cervellione, David Keene and Simon P. KelleyJournal of Pediatric Orthopaedics B 33 (5) 413 (2024)
https://doi.org/10.1097/BPB.0000000000001145
Indications for Nonbiological Reconstruction of Posttraumatic Bone Defects About the Knee
Kevin D. Tetsworth, Zhenya H. Welyczko and Stephen M. QuinnanJournal of Orthopaedic Trauma 38 (4S) S23 (2024)
https://doi.org/10.1097/BOT.0000000000002764
FixThePig: a custom 3D-printed femoral intramedullary nailing for preclinical research applications
Julie Manon, Alexandre Englebert, Robin Evrard, Thomas Schubert and Olivier CornuFrontiers in Bioengineering and Biotechnology 12 (2024)
https://doi.org/10.3389/fbioe.2024.1478676
3D-Printed Model in Preoperative Planning of Sciatic Nerve Decompression Because of Heterotopic Ossification
Sarah L. Lucas, Brian P. Gallagher, Kenneth P. Mullinix, Robert J. Brumback and Bryan W. CunninghamJBJS Case Connector 14 (1) (2024)
https://doi.org/10.2106/JBJS.CC.23.00483
Current Challenges and Future Prospects of Osseointegration Limb Reconstruction for Amputees
Muhammad Adeel Akhtar, Caroline Low, Christopher Tiemessen, Jason Shih Hoellwarth, Munjed Al Muderis and Kevin TetsworthSN Comprehensive Clinical Medicine 6 (1) (2023)
https://doi.org/10.1007/s42399-023-01629-3
169 (2023)
https://doi.org/10.1007/978-981-19-8602-4_10
The 3D-Printed Titanium Truss Cage for the Treatment of Concurrent Complex Malunion, Synostosis and Large Bone Defect Following Forearm Injuries: A Case Report
Surut JIANMONGKOL and Chaiyos VINITPAIROTThe Journal of Hand Surgery (Asian-Pacific Volume) 28 (02) 292 (2023)
https://doi.org/10.1142/S2424835523720098
Orthopaedic Advances: Use of Three-Dimensional Metallic Implants for Reconstruction of Critical Bone Defects After Trauma
Edward R. Westrick, Mitchell Bernstein, Milton T. Little, Geoffrey S. Marecek and John A. ScolaroJournal of the American Academy of Orthopaedic Surgeons 31 (18) e685 (2023)
https://doi.org/10.5435/JAAOS-D-22-00676
Extrusion-Based Additive Manufacturing of the Ti6Al4V Alloy Parts
Maksim Krinitcyn, Alexandr Pervikov, Natalya Svarovskaya, Alexandr Lozhkomoev and Marat LernerCoatings 13 (6) 1067 (2023)
https://doi.org/10.3390/coatings13061067
The Role of Three-dimensional Printed Models in Women’s Health
Afnan AlRawi, Tasneem Basha, Ahmed O Elmeligy, Noha A Mousa and Ghada MohammedWomen's Health 19 (2023)
https://doi.org/10.1177/17455057231199040
The Concept of Scaffold-Guided Bone Regeneration for the Treatment of Long Bone Defects: Current Clinical Application and Future Perspective
Markus Laubach, Frank Hildebrand, Sinduja Suresh, Michael Wagels, Philipp Kobbe, Fabian Gilbert, Ulrich Kneser, Boris M. Holzapfel and Dietmar W. HutmacherJournal of Functional Biomaterials 14 (7) 341 (2023)
https://doi.org/10.3390/jfb14070341
Biofunctionalized 3D printed structures for biomedical applications: A critical review of recent advances and future prospects
Oliver Lotz, David R. McKenzie, Marcela M. Bilek and Behnam AkhavanProgress in Materials Science 137 101124 (2023)
https://doi.org/10.1016/j.pmatsci.2023.101124
Management of segmental defects post open distal femur fracture using a titanium cage combined with the Masquelet technique A single-centre report of 23 cases
Xiang-Yu Ma, Hong Yuan, Dong Cui, Bing Liu, Tian-Yu Han, Hai-Long Yu and Da-Peng ZhouInjury 54 (12) 111130 (2023)
https://doi.org/10.1016/j.injury.2023.111130
Use of patient-specific guides and 3D model in scapula osteotomy for symptomatic malunion
Stefano Cattaneo, Marco Domenicucci, Claudio Galante, Elena Biancardi, Alessandro Casiraghi and Giuseppe Milano3D Printing in Medicine 9 (1) (2023)
https://doi.org/10.1186/s41205-023-00184-w
849 (2023)
https://doi.org/10.1016/B978-0-12-823913-1.00019-1
Three-dimensional technologies in presurgical planning of bone surgeries: current evidence and future perspectives
Yotam Portnoy, Jonathan Koren, Amal Khoury, Shai Factor, Solomon Dadia, Yuval Ran and Amit BenadyInternational Journal of Surgery 109 (1) 3 (2023)
https://doi.org/10.1097/JS9.0000000000000201
Use of 3D Printing Technology in Fracture Management: A Review and Case Series
Raveesh D. Richard, Austin Heare, Cyril Mauffrey, Beau McGinley, Alex Lencioni, Arjun Chandra, Vareesha Nasib, Brian L. Chaiken and Alex TrompeterJournal of Orthopaedic Trauma 37 (11S) S40 (2023)
https://doi.org/10.1097/BOT.0000000000002693
Biomimetic Hematoma as a Novel Delivery Vehicle for rhBMP-2 to Potentiate the Healing of Nonunions and Bone Defects
Vaida Glatt and Kevin TetsworthJournal of Orthopaedic Trauma 37 (11S) S33 (2023)
https://doi.org/10.1097/BOT.0000000000002692
A combined active shape and mean appearance model for the reconstruction of segmental bone loss
D. Kramer, J. Van der Merwe and M. LüthiMedical Engineering & Physics 110 103841 (2022)
https://doi.org/10.1016/j.medengphy.2022.103841
Mechanical Distribution and New Bone Regeneration After Implanting 3D Printed Prostheses for Repairing Metaphyseal Bone Defects: A Finite Element Analysis and Prospective Clinical Study
Bingchuan Liu, Xingcai Li, Weipeng Qiu, et al.Frontiers in Bioengineering and Biotechnology 10 (2022)
https://doi.org/10.3389/fbioe.2022.921545
Research on Several Key Problems of Medical Image Segmentation and Virtual Surgery
Dan Luo, Yu Zhang, Jia Li and Ravi SamikannuContrast Media & Molecular Imaging 2022 (1) (2022)
https://doi.org/10.1155/2022/3463358
Evidence-Based Management of Complex Knee Injuries
Iswadi Damasena and Tim SpaldingEvidence-Based Management of Complex Knee Injuries 50 (2022)
https://doi.org/10.1016/B978-0-323-71310-8.00004-9
Current Perspectives on the Management of Bone Fragments in Open Tibial Fractures: New Developments and Future Directions
Muhamed M Farhan-Alanie, Jayne Ward, Michael B Kelly and Khalid Al-HouraniOrthopedic Research and Reviews Volume 14 275 (2022)
https://doi.org/10.2147/ORR.S340534
Personalized Orthopedics
Celso Júnio Aguiar Mendonça and João Antônio Palma SettiPersonalized Orthopedics 375 (2022)
https://doi.org/10.1007/978-3-030-98279-9_14
Reconstruction of Ipsilateral Femoral and Tibial Bone Defect by 3D Printed Porous Scaffold Without Bone Graft
Guojin Hou, Bingchuan Liu, Yun Tian, Zhongjun Liu and Fang ZhouJBJS Case Connector 12 (1) (2022)
https://doi.org/10.2106/JBJS.CC.20.00592
Uso de planificación preoperatoria e impresión 3D en ortopedia y traumatología: ingresando en una nueva era
D Moya, B Gobbato, S Valente and R RocaActa Ortopédica Mexicana 36 (1) 39 (2022)
https://doi.org/10.35366/106758
Repair of critical diaphyseal defects of lower limbs by 3D printed porous Ti6Al4V scaffolds without additional bone grafting: a prospective clinical study
Bingchuan Liu, Guojin Hou, Zhongwei Yang, et al.Journal of Materials Science: Materials in Medicine 33 (9) (2022)
https://doi.org/10.1007/s10856-022-06685-0
Filling the gap: a series of 3D-printed titanium truss cages for the management of large, lower limb bone defects in a developing country setting
Hammaad Gamieldien, Nando Ferreira, Franz Friedrich Birkholtz, et al.European Journal of Orthopaedic Surgery & Traumatology 33 (3) 497 (2022)
https://doi.org/10.1007/s00590-022-03434-5
Influence of different fixation modes on biomechanical conduction of 3D printed prostheses for treating critical diaphyseal defects of lower limbs: A finite element study
Bingchuan Liu, Yang Lv, Xingcai Li, et al.Frontiers in Surgery 9 (2022)
https://doi.org/10.3389/fsurg.2022.959306
Expanding Quality by Design Principles to Support 3D Printed Medical Device Development Following the Renewed Regulatory Framework in Europe
Livia Adalbert, S P Yamini Kanti, Orsolya Jójárt-Laczkovich, Hussein Akel and Ildikó CsókaBiomedicines 10 (11) 2947 (2022)
https://doi.org/10.3390/biomedicines10112947
Guía práctica de planificación e impresión 3D en Ortopedia y Traumatología
Bruno Gobbato, Daniel Moya, Fernando Menor Fusaro and Sergio ValenteRevista de la Asociación Argentina de Ortopedia y Traumatología 87 (1) 122 (2022)
https://doi.org/10.15417/issn.1852-7434.2022.87.1.1416
An overview of 3D printing and the orthopaedic application of patient-specific models in malunion surgery
Claire N. Thomas, Sophia Mavrommatis, Lisa K. Schroder and Peter A. ColeInjury 53 (3) 977 (2022)
https://doi.org/10.1016/j.injury.2021.11.019
Three-dimensional printed talar prosthesis with biological function for giant cell tumor of the talus: A case report and review of the literature
Qian-Dong Yang, Mi-Duo Mu, Xu Tao and Kang-Lai TangWorld Journal of Clinical Cases 9 (13) 3147 (2021)
https://doi.org/10.12998/wjcc.v9.i13.3147
3431 (2021)
https://doi.org/10.1109/EMBC46164.2021.9630024
Biomechanical Analysis and Design Method for Patient-Specific Reconstructive Implants for Large Bone Defects of the Distal Lateral Femur
Po-Kuei Wu, Cheng-Wei Lee, Wei-Hsiang Sun and Chun-Li LinBiosensors 12 (1) 4 (2021)
https://doi.org/10.3390/bios12010004
Time Reduction by Prebending Osteosynthesis Plates Using 3D-Printed Anatomical Models, In Patients Treated With Open Reduction and Internal Fixation
Marco Aurelio Rendón-Medina, Erik Hanson-Viana, Silvia Claudia Montoya-García, Hecly Lya Vázquez-Morales and Ricardo César Pacheco-LópezJournal of Craniofacial Surgery 32 (4) 1491 (2021)
https://doi.org/10.1097/SCS.0000000000007451
Fractures of the acetabulum: from yesterday to tomorrow
Matej Cimerman, Anže Kristan, Marko Jug and Matevž TomaževičInternational Orthopaedics 45 (4) 1057 (2021)
https://doi.org/10.1007/s00264-020-04806-4
Quantitative fit analysis of acromion fracture plating systems using three-dimensional reconstructed scapula fractures – A multi-observer study
Johan Charilaou, Roopam Dey, Marilize Burger, et al.SICOT-J 7 36 (2021)
https://doi.org/10.1051/sicotj/2021028
Implications of 3-Dimensional Printed Spinal Implants on the Outcomes in Spine Surgery
Brian Fiani, Alexander Newhouse, Alessandra Cathel, Kasra Sarhadi and Marisol SoulaJournal of Korean Neurosurgical Society 64 (4) 495 (2021)
https://doi.org/10.3340/jkns.2020.0272
Design and analysis of three-dimensional printing of a porous titanium scaffold
Jiajie Yang, Yaqiang Li, Xiaojian Shi, et al.BMC Musculoskeletal Disorders 22 (1) (2021)
https://doi.org/10.1186/s12891-021-04520-1
Treatment of Severe Avascular Necrosis of the Talus Using a Novel Keystone-Shaped 3D-Printed Titanium Truss Implant
Eamon Ramhamadany, Carolyn Chadwick and Mark B. DaviesFoot & Ankle Orthopaedics 6 (4) (2021)
https://doi.org/10.1177/24730114211043516
Computer-Generated Three-Dimensional Airway Models as a Decision-Support Tool for Preoperative Evaluation and Procedure-Planning in Pediatric Anesthesiology
Benjamin Kloesel, Bethany Juhnke, Laura Irvine, James V. Donadio, Arthur Erdman and Kumar BelaniJournal of Medical Systems 45 (2) (2021)
https://doi.org/10.1007/s10916-020-01698-0
Classification of Bone Defects: An Extension of the Orthopaedic Trauma Association Open Fracture Classification
Kevin D. Tetsworth, Henry G. Burnand, Erik Hohmann and Vaida GlattJournal of Orthopaedic Trauma 35 (2) 71 (2021)
https://doi.org/10.1097/BOT.0000000000001896
The Effect of Physical Cues of Biomaterial Scaffolds on Stem Cell Behavior
Shuo Wang, Sharareh Hashemi, Scott Stratton and Treena Livingston ArinzehAdvanced Healthcare Materials 10 (3) (2021)
https://doi.org/10.1002/adhm.202001244
Use of Three-dimensional Titanium Trusses for Arthrodesis Procedures in Foot and Ankle Surgery: A Retrospective Case Series
Elizabeth Parry and Alan R. CatanzaritiThe Journal of Foot and Ankle Surgery 60 (4) 824 (2021)
https://doi.org/10.1053/j.jfas.2020.08.011
Patient-Specific 3-Dimensional Printing Titanium Implant Biomechanical Evaluation for Complex Distal Femoral Open Fracture Reconstruction with Segmental Large Bone Defect: A Nonlinear Finite Element Analysis
Kin Weng Wong, Chung Da Wu, Chi-Sheng Chien, Cheng-Wei Lee, Tai-Hua Yang and Chun-Li LinApplied Sciences 10 (12) 4098 (2020)
https://doi.org/10.3390/app10124098
Three-dimensional preoperative planning accurately guides surgeons for intraoperative implant selection in shoulder arthroplasty
Vani J. Sabesan, Ravi Teja Rudraraju, Bhavya Sheth, Jordan Grauer, Matthew Stankard, Kiran Chatha and Diego J.L. LimaSeminars in Arthroplasty: JSES 30 (4) 360 (2020)
https://doi.org/10.1053/j.sart.2020.08.009
An innovative strategy to treat large metaphyseal segmental femoral bone defect using customized design and 3D printed micro-porous prosthesis: a prospective clinical study
Guojin Hou, Bingchuan Liu, Yun Tian, et al.Journal of Materials Science: Materials in Medicine 31 (8) (2020)
https://doi.org/10.1007/s10856-020-06406-5
Differential thermal analysis of the antibacterial effect of PLA-based materials planned for 3D printing
P. Maróti, B. Kocsis, A. Ferencz, M. Nyitrai and D. LőrinczyJournal of Thermal Analysis and Calorimetry 139 (1) 367 (2020)
https://doi.org/10.1007/s10973-019-08377-4
A novel approach using 3-D printing in the Irish National Centre for pelvic and acetabular surgery
Colum Downey, Cathleen McCarrick, Christopher Fenelon, et al.Irish Journal of Medical Science (1971 -) 189 (1) 219 (2020)
https://doi.org/10.1007/s11845-019-02055-y
Tearable and Fillable Composite Sponges Capable of Heat Generation and Drug Release in Response to Alternating Magnetic Field
Koichiro Hayashi, Atsuto Tokuda, Jin Nakamura, Ayae Sugawara-Narutaki and Chikara OhtsukiMaterials 13 (16) 3637 (2020)
https://doi.org/10.3390/ma13163637
Processing, Properties, and Microstructure of Recycled Aluminum Alloy Composites Produced Through an Optimized Stir and Squeeze Casting Processes
John Victor Christy, Ramanathan Arunachalam, Abdel-Hamid I. Mourad, et al.Journal of Manufacturing Processes 59 287 (2020)
https://doi.org/10.1016/j.jmapro.2020.09.067
A novel ‘surgeon-dominated’ approach to the design of 3D-printed patient-specific surgical plates in mandibular reconstruction: a proof-of-concept study
W.-f. Yang, C.-y. Zhang, W.S. Choi, W.-y. Zhu, D.T.S. Li, X.-s. Chen, R. Du and Y.-x. SuInternational Journal of Oral and Maxillofacial Surgery 49 (1) 13 (2020)
https://doi.org/10.1016/j.ijom.2019.05.005
Symptomatic malunion after midshaft clavicle fracture in an adolescent patient: a case report of surgical deformity correction using a 3D printed model
P Consigliere, J Tyler, D Tennent and E PearseThe Annals of The Royal College of Surgeons of England 102 (6) e126 (2020)
https://doi.org/10.1308/rcsann.2020.0046
Material-based therapy for bone nonunion
Yi Leng, Fan Yang, Qian Wang, Zuhao Li, Baoming Yuan, Chuangang Peng, Guangkai Ren, Zhonghan Wang, Yutao Cui, Yanbing Wang, Lanyu Zhu, He Liu and Dankai WuMaterials & Design 183 108161 (2019)
https://doi.org/10.1016/j.matdes.2019.108161
Testing of innovative materials for medical additive manufacturing by DTA
P. Maróti, P. Varga, A. Ferencz, et al.Journal of Thermal Analysis and Calorimetry 136 (5) 2041 (2019)
https://doi.org/10.1007/s10973-018-7839-x
Influence of the Digital Mock-Up and Experience on the Ability to Determine the Prosthetically Correct Dental Implant Position during Digital Planning: An In Vitro Study
Miriam O’Connor Esteban, Elena Riad Deglow, Álvaro Zubizarreta-Macho and Sofía Hernández MonteroJournal of Clinical Medicine 9 (1) 48 (2019)
https://doi.org/10.3390/jcm9010048
Mechanical Performance Assessment of Internally-Defected Materials Manufactured Using Additive Manufacturing Technology
Abdel-Hamid Ismail Mourad, Amir Idrisi, John Christy, Dinu Thekkuden, Hamad Al Jassmi, Abdallah Ghazal, Mahmmoud Syam and Omar Ali Ahmed Al QadiJournal of Manufacturing and Materials Processing 3 (3) 74 (2019)
https://doi.org/10.3390/jmmp3030074
Custom 3D-Printed Total Talar Prostheses Restore Normal Joint Anatomy Throughout the Hindfoot
Joseph Tracey, Danny Arora, Christopher E. Gross and Selene G. ParekhFoot & Ankle Specialist 12 (1) 39 (2019)
https://doi.org/10.1177/1938640018762567
Are Three-Dimensional Printed Models Useful for Preoperative Planning of Tibial Plafond Fractures?
Gen Lin Foo and Ernest Beng Kee KwekThe Journal of Foot and Ankle Surgery 58 (4) 723 (2019)
https://doi.org/10.1053/j.jfas.2018.12.005
3D‑printed pelvis model is an efficient method of osteotomy simulation for the treatment of developmental dysplasia of the hip
Kexin Liu, Zitao Li, Yubo Ma and Hongyu LianExperimental and Therapeutic Medicine (2019)
https://doi.org/10.3892/etm.2019.8332
Personalized 3D-printed endoprostheses for limb sparing in dogs: Modeling and in vitro testing
Anatolie Timercan, Vladimir Brailovski, Yvan Petit, Bertrand Lussier and Bernard SéguinMedical Engineering & Physics 71 17 (2019)
https://doi.org/10.1016/j.medengphy.2019.07.005
Toward Estimating the Uncertainty Associated With Three-Dimensional Geometry Reconstructed From Medical Image Data
Marc Horner, Stephen M. Luke, Kerim O. Genc, et al.Journal of Verification, Validation and Uncertainty Quantification 4 (4) (2019)
https://doi.org/10.1115/1.4045487
3D tlač a 3D operačné plánovanie pri mikrovaskulárnych rekonštrukčných operáciach v maxilofaciálnej chirurgii
Adam Stebel, Maroš Čižmár, Barbora Ďurčanová, Barbora Hocková, Juraj Abelovský, Dušan Hollý, Ľubomír Malíček, Peter Stanko and Rastislav SlávikZubný lekár 26 (1) 20 (2019)
https://doi.org/10.69658/zl.2019.012
Application of three-dimensional printing for pre-operative planning in hip preservation surgery
Lauren Bockhorn, Stephanie S Gardner, David Dong, et al.Journal of Hip Preservation Surgery 6 (2) 164 (2019)
https://doi.org/10.1093/jhps/hnz023
Facilitating industry translation of custom 3d printed bone prostheses and scaffolds through Quality by Design
Daniel Martinez-Marquez, Ali Mirnajafizadeh, Christopher P. Carty and Rodney A. StewartProcedia Manufacturing 30 284 (2019)
https://doi.org/10.1016/j.promfg.2019.02.041
3D Printing in Orthopaedic Surgery
Sanjay P. Prabhu3D Printing in Orthopaedic Surgery 31 (2019)
https://doi.org/10.1016/B978-0-323-58118-9.00003-8
3D Printing in Orthopaedic Surgery
William M. Mihalko3D Printing in Orthopaedic Surgery 49 (2019)
https://doi.org/10.1016/B978-0-323-58118-9.00005-1
3D printed titanium cages combined with the Masquelet technique for the reconstruction of segmental femoral defects
Kevin Tetsworth, Anna Woloszyk and Vaida GlattOTA International: The Open Access Journal of Orthopaedic Trauma 2 (1) e016 (2019)
https://doi.org/10.1097/OI9.0000000000000016
Three-dimensional printing modeling: application in maxillofacial and hand fractures and resident training
Oscar Mario Jacobo, Virginia E. Giachero, Denisse K. Hartwig and Gustavo A. MantranaEuropean Journal of Plastic Surgery 41 (2) 137 (2018)
https://doi.org/10.1007/s00238-017-1373-0
Radiological Society of North America (RSNA) 3D printing Special Interest Group (SIG): guidelines for medical 3D printing and appropriateness for clinical scenarios
Leonid Chepelev, Nicole Wake, Justin Ryan, et al.3D Printing in Medicine 4 (1) (2018)
https://doi.org/10.1186/s41205-018-0030-y
Ultrasound‐based three‐dimensional printed medical model for multispecialty team surgical rehearsal prior to fetoscopic myelomeningocele repair
J. L. Miller, E. S. Ahn, J. R. Garcia, G. T. Miller, A. J. Satin and A. A. BaschatUltrasound in Obstetrics & Gynecology 51 (6) 836 (2018)
https://doi.org/10.1002/uog.18891
Advances in deformity correction, limb lengthening and reconstruction
Yasser ElbatrawySICOT-J 4 E1 (2018)
https://doi.org/10.1051/sicotj/2018003
Additive manufactured metallic implants for orthopaedic applications
Kwok-Chuen Wong and Peter ScheinemannScience China Materials 61 (4) 440 (2018)
https://doi.org/10.1007/s40843-017-9243-9
Medical applications of stereolithography: An overview
Anish Kaza, Julia Rembalsky, Nicholas Roma, Vikas Yellapu, WilliamG Delong and StanislawP StawickiInternational Journal of Academic Medicine 4 (3) 252 (2018)
https://doi.org/10.4103/IJAM.IJAM_54_18
Are New Technologies Being Introduced and Adopted Appropriately in Orthopedic Practice?
Stuart B. GoodmanOrthopedics 41 (3) 126 (2018)
https://doi.org/10.3928/01477447-20180501-05
Large Osseous Defect Reconstruction Using a Custom Three-Dimensional Printed Titanium Truss Implant
Eric So, Vincent H. Mandas and Lee HladThe Journal of Foot and Ankle Surgery 57 (1) 196 (2018)
https://doi.org/10.1053/j.jfas.2017.07.019
Titanium Scaffolding: An Innovative Modality for Salvage of Failed First Ray Procedures
Natalie Coriaty, Katherine Pettibone, Nicholas Todd, Shannon Rush, Ryan Carter and Colin ZdenekThe Journal of Foot and Ankle Surgery 57 (3) 593 (2018)
https://doi.org/10.1053/j.jfas.2017.10.011
The effect of 3D-printed Ti6Al4V scaffolds with various macropore structures on osteointegration and osteogenesis: A biomechanical evaluation
Han Wang, Kexin Su, Leizheng Su, Panpan Liang, Ping Ji and Chao WangJournal of the Mechanical Behavior of Biomedical Materials 88 488 (2018)
https://doi.org/10.1016/j.jmbbm.2018.08.049
What we have achieved in the design of 3D printed metal implants for application in orthopedics? Personal experience and review
Zuhao Li, Chenyu Wang, Chen Li, et al.Rapid Prototyping Journal 24 (8) 1365 (2018)
https://doi.org/10.1108/RPJ-10-2017-0205
Preliminary results using patient-specific 3d printed models to improve preoperative planning for correction of post-traumatic tibial deformities with circular frames
Pablo S. Corona, Matías Vicente, Kevin Tetsworth and Vaida GlattInjury 49 S51 (2018)
https://doi.org/10.1016/j.injury.2018.07.017
Additive manufacturing technique-designed metallic porous implants for clinical application in orthopedics
Chaohua Gao, Chenyu Wang, Hui Jin, et al.RSC Advances 8 (44) 25210 (2018)
https://doi.org/10.1039/C8RA04815K
Regenerative Medicine in Lower Limb Reconstruction
Josephine K McEwan, Howard C Tribe, Neal Jacobs, Nicholas Hancock, Amir A Qureshi, Douglas G Dunlop and Richard OC OreffoRegenerative Medicine 13 (4) 477 (2018)
https://doi.org/10.2217/rme-2018-0011