Open Access
Review
Table 2
Tips and tricks for implant compatibility
| Cup | The cup should be specifically designed for a dual mobility system. |
| Liner | The liner used must be from the same manufacturer as the cup. The liner and cup are an inseparable combination. |
| The size of the liner must be in accordance with the size of the cup; according to the manufacturer’s recommendations. | |
| UHMWPE or XLPE liners may be used. Please note that no long-term studies are available on the evaluation of the XLPE in DMC. | |
| Femoral head | Heads with a diameter of 22 mm are to be favored. 28 mm diameter heads should not be used with cups smaller than 54 mm. |
| Femoral stem | The femoral stem used should have a thin polished neck that is trapezoid, elliptical or circular in shape. |
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.