EDP Sciences logo
Submit your paper
Search
Menu
All issues Volume 5 (2019) SICOT-J, 5 (2019) 2 References
Open Access
Issue
SICOT-J
Volume 5, 2019
Article Number 2
Number of page(s) 6
Section Knee
DOI https://doi.org/10.1051/sicotj/2018056
Published online 14 January 2019
  1. InsallJN (1993) Revision of aseptic failed total knee arthroplasty. Surgery of the knee, 2nd edn.New York, Churchill Livingstone, pp. 935–957. [Google Scholar]
  2. RandJA (1991) Bone deficiency in total knee arthroplasty. Use of metal wedge augmentation. Clin Orthop Relat Res 271, 63–71. [Google Scholar]
  3. EnghGA, AmmeemDJ (1999) Bone loss with revision total knee arthroplasty: defect classification and alternatives for reconstruction. Instr Course Lect 48, 167–175. [Google Scholar]
  4. TomsAD, BarkerRL, JonesRS, KuiperJH (2004) Impaction bone grafting in revision joint replacement surgery. J Bone Joint Surg 86-A, 2050–2060. [Google Scholar]
  5. SlooffTJ, HuiskesR, van HornJ, LemmensAJ (1984) Bone grafting in total hip replacement for acetabular protrusion. Acta Orthop Scand, 55, 593–596. [CrossRef] [PubMed] [Google Scholar]
  6. SamuelsonKM (1988) Bone grafting and noncemented revision arthroplasty of the knee. Clin Orthop 226, 93–101. [Google Scholar]
  7. LonnerJH, LotkePA, KimJ, NelsonC (2002) Impaction grafting and wire mesh for uncontained defects in revision knee arthroplasty. Clin Orthop Relat Res 404, 145–151. [Google Scholar]
  8. LotkePA, CarolanGF, PuriN (2006) Impaction grafting for bone defects in revision total knee arthroplasty. Clin Orthop Relat Res 446, 99–103. [CrossRef] [PubMed] [Google Scholar]
  9. LotkePA, CarolanGF, PuriN (2006) Technique for impaction bone grafting of large bone defects in revision total knee arthroplasty. J Arthroplasty 21(4 Suppl 1), 57–60. [CrossRef] [PubMed] [Google Scholar]
  10. BradleyGW (2000) Revision total knee arthroplasty by impaction bone grafting. Clin Orthop 371, 113–118. [Google Scholar]
  11. BardenB, FitzekJG, LoërF (2004) Rotating platform components for revision of hinged knee prostheses. Clin Orthop 423, 144–151. [Google Scholar]
  12. BenjaminJ, EnghG, ParsleyB, DonaldsonT, CoonT (2001) Morsellized bone of defects in revision TKA. Clin Orthop 392, 62–67. [Google Scholar]
  13. UllmarkG, HoveliusL (1996) Impacted morsellized allograft and cement for revision total knee arthroplasty: a preliminary report of 3 cases. Acta Orthop Scand 67, 10–12. [CrossRef] [PubMed] [Google Scholar]
  14. JazrawiLM, BaiB, KummerFJ, HiebertR, StuchinSA (2001) The effect of stem modularity and mode of fixation on tibial component stability in revision total knee arthroplasty. J Arthroplasty 16, 759–767. [CrossRef] [PubMed] [Google Scholar]
  15. ClatworthyMG, BallanceJ, BrickGW, ChandlerHP, GrossAE (2001) The use of structural allograft for uncontained defects in revision total knee arthroplasty. A minimum five-year review. J Bone Joint Surg Am 83, 404–411. [CrossRef] [PubMed] [Google Scholar]
  16. WhitesideLA, BicalhoPS (1998) Radiologic and histologic analysis of morselized allograft in revision total knee replacement. Clin Orthop Relat Res 357, 149–156. [Google Scholar]
  17. TomsAD, McClellandD, ChuaL, de WaalMalefijt M, VerdonschotN, Spencer JonesR, KuiperJH (2005) Mechanical testing of impaction bone grafting in the tibia: initial stability and design of the stem. J Bone Joint Surg Br 87(5), 656–663. [CrossRef] [PubMed] [Google Scholar]
  18. TomsAD, BarkerRL, McClellandD, ChuaL, Spencer-JonesR, KuiperJH (2009) Repair of defects and containment in revision total knee replacement: a comparative biomechanical analysis. J Bone Joint Surg Br 91(2), 271–277. [Google Scholar]
  19. van LoonCJ, BumaP, de Waal MalefijtMC, van KampenA, VethRP (2000) Morselized bone allografting in revision total knee replacement – a case report with a 4-year histological follow-up. Acta Orthop Scand 71(1), 98–101. [CrossRef] [PubMed] [Google Scholar]
  20. ShethNP, LonnerJH (2009) Clinical use of porous tantalum in complex primary total knee arthroplasty. Am J Orthop (Belle Mead NJ) 38(10), 526–530. [PubMed] [Google Scholar]
  21. KuiperJH, SolimanA, CheahK, RichardsonJ (2004) Stability of impaction-grafted hip and knee prostheses: surgical technique, implant design, and graft compaction. In: Impaction Bone Grafting in Revision Arthroplasty. DelloyeC, BannisterG , Editors. New York, Marcel Dekker, pp. 75–94. [CrossRef] [Google Scholar]
  22. SawickiA, SwidzinskiW (1998) Elastic moduli of non-cohesive particulate materials. Powder Technol 96, 24–32. [Google Scholar]
  23. KligmanM, ConV, RoffmanM (2002) Cortical and cancellous morselized allograft in revision total hip replacement. Clin Orthop 401, 139–148. [Google Scholar]
  24. SlooffTJ, BumaP, SchreursBW, SchimmelJW, HuiskesR, GardeniersJ (1996) Acetabular and femoral reconstruction with impacted graft and cement. Clin Orthop 323, 108–115. [Google Scholar]
  25. LewisPL, BrewsterNT, GravesSE (1998) The pathogenesis of bone loss following total knee arthroplasty. Orthop Clin North Am 29, 187–197. [CrossRef] [PubMed] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.